Maximum user weight110Kg
Flywheel (kg)Equivalente a 18
Saddle typeProstatic saddle
Handlebars adjustementHorizontal and Vertical
Seat adjustmentHorizontal and vertical
|Preset programs (Prg)||-|
|User profiles (uPrg)||-|
|Body Fat Test||-|
|Maximum user weight||110Kg|
|Flywheel (kg)||Equivalente a 18|
|Saddle type||Prostatic saddle|
|Handlebars adjustement||Horizontal and Vertical|
|Seat adjustment||Horizontal and vertical|
Take the front stabiliser bar, place it at the front of your unit and tighten all of the nuts securely. Do the same with the rear stabiliser bar.
Screw the right pedal (R) clockwise to clockwise into the right crank marked with an R. The left pedal (L) is screwed counterclockwise to clockwise in the left crank marked with a L.
Enter the seat tube into the hole on the main body. Then, enter the saddle clamp on the horizontal steering stem, place the seat and adjust it.
Place the handlebar into the handlebar tube and then enter the handlebar tube into the hole of the projection tube. Then place the handlebar in the tube screwing it in clockwise.
Connect the terminals out of the handlebar tube and the monitor. Enter the monitor by sliding it into the main tube.